Get a Better Grip on Tooling Costs with Versatile Holders
1 holder plus 1 shank size diameter = too much tooling inventoryDiscover the product range
Complicated tool holding systems not only require special care and training to avoid operator injury, but they add extra time and costs. Eliminate the risk and extra maintenance and get in the cut faster while you increase versatility with Seco Hydraulic Chucks and Reduction Sleeves. This simple, easy-to-use tool holding reduces inventory with the versatility to accommodate various cutter shank sizes.
Your challenge:
Complicated tool holding systems increase part-production costs and time.
The Seco solution:
Make tool changeouts fast and safe with simple, easy-to-use toolholders that eliminate the drawbacks of costly, complex tooling systems.
Consistent part quality depends on precision tool holding. With 360° tool-shank holding strength and precise centering, Seco Hydraulic Chucks and Expansion Sleeves ensure reliability, along with exceptional machining performance and maximized tool life.
Your challenge:
Poor-quality tool holders shorten cutter life, increase job costs and compromise part machining accuracy.
The Seco solution:
Seco Hydraulic Chucks and Reduction Sleeves extend tool life and boost part quality with strong uniform holding power.
The more material you remove in one pass, the faster you machine parts and complete jobs, but you need a tool holder that’s up to the job. For aggressive roughing as well as finishing operations, the Seco Hydraulic Chuck HCR Reinforced version packs the holding power to handle radial cutting forces up to 2000 Nm for secure and reliable machining.
Your challenge:
Insufficient tool holding strength forces slower cutting speeds and limits tool engagement.
The Seco solution:
Compact and robust chucks let you maximize depths of cut on tough materials without the need for special holders.
High spindle speeds magnify the effects of even the tiniest amounts of runout, threatening part quality and tool life as well as the health of machine spindle bearings. When machining at speeds up to 25,000 rpm, Seco Hydraulic Chucks and Expansion Sleeves minimize runout and the vibration it causes. Get worryfree tool holding without the added cost of specialty holders.
Your challenge:
Runout from holders reduces part quality and shortens tool life.
The Seco solution:
Balanced for spindle speed up to 25,000 rpm, Seco Hydraulic Chucks and Reduction Sleeves deliver precise and repeatable holding accuracy.
Shops typically try to machine deep and narrow part cavities one of two ways: with long cutter lengths or by repositioning parts in multiple setups. Both approaches have their production drawbacks. Reduce the risk of vibration from long tools while you gain access to hard-to-reach features without the need to re-clamp parts. With a length of up to 150 mm, HCS Slim tool holders from the Seco Hydraulic Chucks and Expansion Sleeves product line allow you to use standard length cutters instead.
Your challenge:
Deep and narrow part features are inaccessible during light milling and drilling operations.
The Seco solution:
Long, slim tool holders provide extended tool reach for effective workpiece accessibility.
Tool holder vibration is the enemy, especially at high spindle speeds. It threatens part surface finish quality and shortens the life of cutting tools. To keep vibration under control, Seco Hydraulic Chucks incorporate special internal reservoirs in which oil generates strong 360° tool clamping forces and acts as a natural vibration dampening system – engaged with the simple turn of a hex screw.
Your challenge:
Excessive tool holder vibration causes poor part surface finishes and premature tool wear.
The Seco solution:
Internal oil reservoirs provide superior tool holding strength while they reduce vibrations at high speeds for smoother surface finishes and longer tool life.
Tooling claims a significant portion of job cost, so greater process versatility means fewer tools and more cost savings. For the flexibility to accommodate a wide range of cutting tool sizes, 05HC slotted reduction sleeves for Seco Hydraulic Chucks allow one holder to handle various shank diameters. They provide through-tool or peripheral cooling capabilities and work with either metric or inch-size tools.
Your challenge:
Reduce tool holder inventory and associated costs.
The Seco solution:
Special slotted reduction sleeves enable tool holders to handle multiple tool shank sizes and coolant delivery types.
Discover the product range
Contact Us
STAY UPDATED ON NEWS AROUND HOLDERS, ADAPTERS AND ACCESSORIES
PLEASE CLICK HERE
