Stop End Screw Setting Adapters
Seco stop screw setting adapters type 05R5600 are used in conjunction with the comparator of the Pack Easyshrink™ 20 N°3. They allow accurate positioning of the stop end screw of Shrinkfit holders. These adapters feature hexagonal sizes suitable for stop screws of current Shrinkfit holders type EPB 5600 or EPB 5603. The adapter bore is oversized in relation to the cutting tool shank, and the adapter shank is undersized to the Shrinkfit holder bore.
Placing the tool into the adapter, the hexagonal nose on adapter’s back-end engages the stop screw to set it until the cutter front end reaches the required position, taking into account the adapter’s length from the bottom of the bore to the back-end of the shank. The adapters are available for tool shanks from 6 to 32 mm.