Niagara Cutter Multi Flute - Elite Series
The Niagara S638 six-flute end mill adds a new dynamic to high-speed milling and peel milling strategies.
ACHIEVE EFFICIENT OPTIMIZED ROUGHING
Reducing cycle times, increasing throughput and extending tool life has never been easier with the Niagara Cutter™ Multi Flute family of end mills. This product series now offers smaller diameters down to 1/8”, necked versions with extended reaches and even a new ball nose option for those demanding 3D applications that require optimal performance and tool life. The most unique addition to these products is the advanced chip splitter design. This innovative engineering allows for unsurpassed chip control in applications requiring depths of cut up to 3 times the diameter of the tool.
YOUR BENEFITS
Increased chip evacuation in deep pocket applications
AlTiN coating increases tool life
Smoother cutting for an improved surface finish
High heat abrasion resistance
Stronger cutting edge
RANGE OVERVIEW
S638/S638R - 6-flute - Square & Radius
2 and 2.5 x D flute length 0.125”- 1.00”
Cylindrical shank, dead sharp and radius 0.010”, 0.015”, 0.030”, 0.060”, 0.090”, 0.120” & 0.190”
SN638/SN638R - 6-flute - Necked Series
2 x D flute length and 4 x D reach length 0.375” - 1.000”
Cylindrical shank, standard aerospace radii 0.015”, 0.030”, 0.060”, 0.120” & 0.250”
SB638/SBN638 - 6-flute - Ball Nose Series
1 and approx 2.5 x D flute length 0.250”- 1.000”
Necked version - 1 x D flute length and 3 x D reach length
Cylindrical shank S738/S738R - 7-flute - Chamfer & Radius
1.5, 2.5 and 4 x D flute length 0.250” - 0.500”
Cylindrical shank, chamfer and radius 0.015”, 0.030” & 0.060”
S938/S938R - 7-flute - Chamfer & Radius
1.5, 2.5 and 4 x D flute length 0.250” - 0.500”
Cylindrical shank, chamfer and radius 0.015”, 0.030” & 0.060”
SCS638/SCS638R, SCS738R, SCS938R - 9-flute - Advanced Chip Splitters
Approx. 3.2 x D flute length
Cylindrical shank 0.250” - 1.000”
Explore Range
6-Flute / 6-Flute with Chip Splitters
7-Flute / 7-Flute with Chip Splitters
9-Flute / 9-Flute with Chip Splitters
HOMERelated content
Niagara Cutter Multi Flute - Elite Series
Video: Niagara Cutter ELITE Series Multi Flute S638
S638R - High Performance - Square - Universal - 6 Flutes
High Performance Optimized Roughing in 17 4 PH Stainless Steel Dry
Niagara Cutter High Feed Machining Product Introduction
ABOUT NIAGARA CUTTER
High Performance Optimized Roughing with Stabilizer 2.0
Niagara Cutter® HTA Coating Product Expansion
Niagara Cutter's SN200R, SN400R and SN500R
Optimized Roughing 17-4 PH Stainless Steel Dry
Mold & Die End Mill Expansion Introduction
Video: Multi Flute Range Addition
Product Range Presentation - HTA Coating Product Family
Brochure - HTA Coating Product Family
Octomill 06: Explanation and comparison of the system design
Octomill 06: Insert Handling
High Performance Optimized Roughing in 17 4 PH Stainless Steel Dry | SECO TOOLS
Video: High Performance Optimized Roughing with Stabilizer 2.0
Video: Niagara Cutter Stabilizer 2.0 Product Introduction
Tackle Aluminum Milling with Ease Using the Niagara Cutter A Series
Niagara Cutter A245/A345 End Mills in Aluminum Application Video