Jabro™ JHP490
Your Challenge:
Performing rough machining with Minimum Quantity Lubrication.
Our Solution:
A high performance end mill for use in aluminum, Jabro™ JHP490 allows through-tool use of Minimum Quantity Lubrication (MQL) or soluble oil to increase quality and obtain time and cost savings. The cutter also incorporates an optimized chipbreaker profile for reduced cutting forces, smooth cutting action and high metal removal rates. Your benefits include faster cutting cycle times and less costs.
View the product range
Case Study:
Material: Aluminium
Coolant: MQL
Operation: Rough Pocket Mill
Criterion: Tool Life / cm3/min
Fixturing: Bespoke
Tool: 490V200R200Z3A-MEGA-T
Cutting Data:
Metric
- vc 1700 m/min
- fz 0.16 mm/tooth
- ap 10mm
- ae 16mm
Inch
- vc 5578 sf/min
- fz 0.006" ipt
- ap 0.397
- ae 0.630
Results:
3 Flute, Internal through coolant suitable for MQL,
535 ipm 13528 mm/min, Qw=1,300 cm3/min
